|
Product: Concrete Overlayment Cemlogic ST200 Stampable Overlay
Description: Now you can get great consistency of material, color and stamp-ability in architectural texturing of cementitious Stampable Overlays. Floric’s CemLogic ST-200 Stampable Overlay provides a uniform surface that faithfully transfers texturing from Concrete Stamps, whether transitioning between existing surfaces or working with a course of construction defeats or damage. Floric’s CemLogic ST-200 Stampable Overlay permits a wide range of architectural paving finishes, from Random Stone, Ashlar Slate, European Fan and Cobble Stone to seamless texturing surfaces like Roman Slate, Sand Stone and Rough Stone.
Floric Polytech ST-200 Stamp Overlay is a multi-use thin section, poured in place, cementitious architectural decorative topping designed to give the appearance of textured Stamped Concrete. This produces a wide range of architectural paving finishes, such as random stone, ashler slate, european fan, cobble stone, and seamless texturing surfaces like roman slate, sand stone and rough stone. Many existing available stamps may be used with little or no modification from traditional stamping techniques. ST-200 Stamp Overlay may be used anywhere conventional floor coverings such as tile; marble, carpet and slate are used horizontally over concrete
ST-200 Stampable Overlay lets you use standard existing stamps with little or no modification of stamping techniques.
The polymer primer is applied by roller, spray or squeegee and the ST-200 Stampable Overlay mix is applied by gauge rake or screed method followed by smooth toweling. Once properly set, liquid release is applied and stamping is conducted in the usual manner. A wide range of slip resistant profiles are also available.
|
|
Typical use include:
Driveways, Patios and pool decking, Walkways and Malls, Casinos, Restaurants and Bars, Retail Flooring, Lobby Flooring, Amusement Parks, Museums, Balconies
Advantages:
- Thin section compared to conventional stamped concrete.
- May be applied anywhere conventional floor coverings are used.
- Packaged in pre-portioned units, for ease of mixing.
- Available in a wide range of standard colors and is acid stainable.
- Design potential is almost unlimited, as it may be incorporated with many other flooring finishes, like inlays of natural stone, slate, marble, terrazzo, glass and some metals.
- Low maintenance (when appropriately sealed) and is also available in a wide range of slip retardant profiles.
Limitations:
- May reflect working cracks in substrate.
- May not be installed over working pour joints, control, or expansion joints and large moving cracks or cold joints.
- Dry time is approximately 8 hours per ¼” of thickness, and materials must not be exposed to temperatures below freezing during storage and initial curing period, low temperatures will increase dry time.
- Installation should not be attempted when temperatures are below 55ºF (12ºC) or above 110ºF (43ºC).
|
|
