|
Product: Pigmented Clear Epoxy Thin-Film CQ
Description: CQ Clear Epoxy Pigmented Thin-Film Coating can be applied smooth or as a moderate skid resistant Epoxy Coating over Concrete Floors or Miracote Composite Floors, as well as stairs, ramps and other surfaces requiring an Epoxy Coating system.
CQ Clear Epoxy Pigmented Thin-Film Coating is a Scientifically Superior three component coating system consisting of CQ Clear Epoxy and Hardener, and ColorPax-E (Epoxy pigment pack). The three components are mixed together, squeegeed and back rolled. CQ Clear Epoxy Pigmented systems are available in popular, but limited, range of standard colors.
Purpose: For moderate skid resistance, a forth component, Miracote Synthetic Aggregate, can be added.
It can be finished with optional Topcoats of clear (gloss) or matte finish, Mirathane APU 100 (Aliphatic Polyester Urethane), which are chemical, abrasion and UV stable or topcoated with CR-N Topcoat when subjected to extremely harsh chemical exposure or Glazetop a highly chemical and abrasion resistant Polyurea topcoat.
CQ Clear Epoxy Pigmented Systems are available with an EPA Listed Anti-Microbial Biocide, which protects against growth of algae, bacteria, fungi, mold, mildew, yeast, etc.
|
|
Where to use:
The intended use ranges from dry to wet environments for Commercial Flooring, Industrial Flooring and institutional areas, such as manufacturing, processing, Warehouse Floors, stairs, ramps, walkways, corridors and commons-areas. The material can be applied over new or existing concrete or Miracote Composition Floors or metal or wood sub-surfaces (Consult Crossfield for detailed specification for metal or wood surfaces).
In addition, CQ Clear Epoxy Pigmented Scientifically Superior systems include: Slurry Coat; Slurry coat Broadcast; Single Broadcast and Double Broadcast.
Advantages:
- Virtually free of VOC.
- Can be applied over a wide range of surfaces.
- No significant odor during installation.
- Resists most common chemical spillage.
- Profile selection from smooth to moderately aggressive.
- Crossfield offers a Limited Supplemental Warranty of ten years against moisture vapor suppression disbondment of CQ Clear Epoxy Pigmented Systems when used over MVERS II Primer. Contact Crossfield for additional information.
Limitations:
- If subsurface cracks due to continued thermal flexing or building settlement, floor may reflect those cracks to some degree.
- Surface on which applied requires careful preparation and must be free of contami-nation that might cause a failure of bond.
- Limited UV stability – not recommended for exterior applications.
- If either component is exposed to sustained temperatures below 40°F, crystallization may occur. During periods of cold weather, care should be taken to allow components to warm to 60°F prior to use.
Applications:
School Cafeterias and Kitchens, Media Centers, School Locker Rooms and Restrooms, Laboratories, Bottling Lines, Mixing Lines, Bakeries and Dairies, Meat Packing Areas, Kitchens, Coolers, Wineries, Emergency Rooms, Clean Rooms, Patient Rooms, Hospital Cafeterias, Mechanical Rooms, Assembly Lines, Loading Docks, Control Rooms, Chemical Storage Areas, Plant Locker and Shower Rooms, Plant Cafeterias, Bathrooms, Garage Floors, Supermarket Floors, Restaurant Floors, Lobbies, Shopping Malls, Automobile Dealerships, Stadium Concessions
|
|
