|
Product: Drylook Sealer
Description: Miracote Drylook Sealer is a nano scale, moisture-curing premium, non-aqueous, VOC-compliant sealer formulated to provide maximum stain protection. Complies with VOC regulations.
|
|
Where to use:
- Designed for use as an easy-to-apply sealer for faux concrete, stone, and tile applications. Drylook Sealer can also be used on ceramic, porcelain, or natural stone tile, as well as a grout sealer.
- Drylook Sealer is designed for use on concrete, CMU, all faux masonry surfaces, polymer modified cementitious treatments, as well as on all types of tile where a natural, dry-look appearance is desired. When cured, it will not change the color or appearance of the substrate that it is sealing.
- Drylook Sealer can be used in both interior and exterior service. It possesses excellent resistance to ultraviolet light including freedom from color change or degradation.
Advantages:
- Drylook Sealer allows moisture vapor transmission and possesses very good stain resistance. It is stable under UV exposure and it has low VOC of less than 100 grams per liter. Drylook Sealer is compliant with Industrial Maintenance Coating Guidelines and the South Coast Air Quality Management District (SCAQMD) Rule 1113.
- Transparent, natural look that is easy to maintain clean appearance and is highly resistant to deterioration when exposed to routine mild cleaning materials such as citrus, light TSP and surfactant cleaners.
- Excellent water repellency.
- Resists wide range of in-service chemicals and is very stain- resistant to a wide variety of household foods and chemicals. Staining resistance and cleaning capability improves after 30 days.
- Significantly reduces chloride ion penetration.
- Improved corrosion resistance on steel-reinforced structures.
- Excellent resistance to efflorescence.
- Resists microbial attack.
- ADA Compliant: for in-situ, validate ADA Compliance with a Variable Incident Tribometer Machine.
- LEED Credit Points may be available under several different Classifications.
- Does not contain chemicals targeted by Green Seal Standard GS-11 and LEED-CS as unacceptable.
Limitations:
- Substrate must be above 40oF (4.4oC), dry and free of excessive water vapor transmission with a relative humidity below 85% at time of installation. Drylook Sealer is not a film-forming sealer. Harsh cleaning methods, combined with high alkaline, acidic, or solvent-based cleaners will affect product longevity. Use of strong cleaners such as a high pH strippers that contain a high level of sodium hydroxide or potassium hydroxide are used, recommend re-application of Drylook routinely, depending on the frequency of cleaning operation, but usually within every two to three years.
- Do not apply over moving cracks, joints, or unsupported gaps. If sub-surface cracks after the coating is applied, the cracks can reflect through. Do not apply over working joints, expansion joints, or construction joints.
- The proper application of this product is the sole responsibility of the end user. Job site visits by Miracote representatives are a support service only and are not participatory in the quality or performance of the contractor. Supervision and quality control of work and contract are the sole responsibility of the contractor and user.
- Measure surface and ambient temperatures to assure application is within the acceptable rage
|
|
