|
Product: MiraStamp
Description: Miracote MiraStamp basecoat is a polymer modified, two- component cementitious, thin-stamped overlay applied in conjunction with color, stains and sealers to produce decorative Architectural paving finishes. MiraStamp has very high compressions strength and is suited for continued exposure to commercial vehicular and pedestrian traffic. The system consists of a wet primer application, basecoat latex-modified mortar pigmented with Miracote ColorPax LIP, MiraStamp LR(Liquid Releas), Miracote Mirastain, and Miracote protective clear sealers and topcoats. Available sealers are designed for various conditions and traffic. Most all available stamps can be used with the MiraStamp system with little or no modification to traditional stamping techniques used to produce a number of attractive patterns. MiraStamp Architectural paving system is installed as a 1/4" to 5/8" decorative overlayment.
|
|
Where to use:
Interior/Exterior applications - Restaurants - Pedestrian and Vehicular traffic surfaces - Courtyards - Driveways - Pedestrian Bridges - Balconies - Pool Decks - Lobbies - Entryways/Foyers - Plaza Decks - Theme Parks - Breezeways, Kitchens and Bathrooms, Driveways, Patios and Balconies, Garage Floors, Supermarkets, Restaurants, Lobbies, Shopping Malls, Automobile Dealerships, Stadium Concessions
Advantages:
- Freeze-Thaw Resistant: water retardancy prevents cold weather scaling
- Simple to use: Pre-Portioned mixing
- Polymer-Fortified: Self curing and superior adhesion
- LEED (Leadership in Energy and Environmental Design) Credit eligible
- Available in standard and custom colors
- High Compressive Strength
- Eliminates the need for concrete removal
- Low maintenance cost
Limitations:
- Do not apply over moving cracks as they will reflect through.
- If sub-surface cracks after the coating has been applied, those cracks may also reflect through.
- Do not apply over working joints, expansion joints, or construction joints. These must be saw-cut and filled with an approved sealant.
|
|