|
Product: CS101 Clear Gloss or Matte Seal
Description: Chroma-TechTM CS-101 ClearSeal is 100% Acrylic and completely UV stable without additives. It’s a solvent borne acrylic with silicon modification for superior adhesion and the richest wet look finish available today.
Purpose: Completing a concrete restoration or a stamped concrete project is only the beginning. It has to be protected for the long term. Floric Polytech’s Chroma-TechTM CS-101 ClearSeal is the choice of professionals everywhere because they want to make sure their hard work will last. It’s easily applied to almost any interior or exterior overlayments, natural stone or concrete surface whether stamped, acid-stained, inter locking pavers, even self-leveling topping.
Technically, Chroma-TechTM CS-101 ClearSeal is a single component, solvent borne acrylic sealer (available in gloss and matt finish sealer), used over cementitious surfaces, polymer-modified resurfacers, toppings, rock and brick. It is as ideal in retail stock rooms for dust proofing as it is for enhancing color on all hardscape surfaces.
It is also used to enhance the color of natural surfaces of stone and pavers in landscaping. It can be easily applied on both interior and exterior projects over a wide range of climates and, because it’s completely UV stable, it will not yellow or chalk. As a matter of fact, we’ve been setting the standards for solvenated acrylics to exceed all A.D.A. slip coefficient requirements by incorporating a wide variety of non-slip media.
Since Chroma-TechTM CS-101 ClearSeal can be applied with roller, brush or sprayer, application couldn’t be simpler. For the fastest and easiest application, it’s simply sprayed to cover the material surface. It dries quickly for recoat and service. Chroma-TechTM CS 101 ClearSeal may be used to seal porous tile, stucco, masonry, EIFS and most natural stone. It acts as a dust proofer as well as it helps restrict water penetration and salt attack.
|
|
Typical uses include:
- Indoor/Outdoor Concrete
- Interlocking Pavers
- Stamped or Exposed Aggregate Concrete
- Natural Stone
- Terrazzo and Synthetic Stone
- Acid Stained Floors
- Quarry Tile
- Stock rooms floors
- Even Stucco!
Advantages:
- Water-retardant, will aid in restricting water penetration and salt attack.
- Enhanced color vibrancy, (creates wet look)
- Slip-resistant (when incorporated with a non-slip medium)
- Excellent adhesion and abrasion-resistance
- Low cost and easy to install by brush, roller or spray
- Low maintenance and moderate chemical resistance
- May be used on a wide range of surfaces
Limitations:
- May reflect working cracks in substrate.
- Heavy foot traffic areas may require scheduled maintenance coats.
- Not recommended for applications below 50°
- Do not apply more than two coats over soft natural stones Exterior i.e.: (flagstone, limestone)
- Must not be install when there’s not a 5% variance between wet bulb humidity and dew point.
- Must be installed over a clean dry surface.
|
|
